Summary:
UGS series color quartz glass level meters with performance of on site indication are made of high-purity quartz tube(99.99%SiO2).These meters featured with distinct indication、good sealing performance、high temperature resistance,high pressure resistance,anti-viscosity,long life,convenient rinse and maintenance are widely used to detect and indicate the levels of various vessels and boilers in petroleum,chemical industry,power,metallurgy industry etc.
UGS-A standard color quartz glass level meter is suitable for measuring level of multiple hydrocarbons and oil solutions which are transparent or more transparent medias such as: water、liquid ammonia、petroleum、gasol and alkali liquor at room temperature.It's a widely used on site level meter without blind zone when displaying.
UGS-B/E conventional color quartz glass level meter is suitable for measuring level of multiple hydrocarbons and oil solutions which are transparent or more transparent medias such as: water、liquid ammonia、petroleum、gasol and alkali liquor at room temperature.But there's blind zone when displaying.
UGS-C corrosion resistant color quartz glass level meter is suitable for acidic or alkaline liquids etc.and many organic solvents(especially activity group solvent)while it isn't suitable for measurement of liquid medias such as concentrated nitric acid,chromic acid mixture,chlorinated solvents,aliphatic series and aromatic hydrogen.
UGS-D corrosion resistant color quartz glass level meter is suitable for measuring level of corrosive media and level in higher working temperature occasions.Since it adopts the combination of stainless steel lining with PTFE tee joint and straight pipes,featured with high reliability.But the disadvantage is that there exists upper and lower blind zone when measuring.
Type Selection:
UGS- |
|
|
|||||||||
|
A |
Standard:non-blind area,valve with safety device,with sewage valve,-50~350℃ |
Basic Type |
||||||||
B |
Normal:valve without safety device,with sewage valve,temp.:-50~350℃ |
||||||||||
C |
Anti-corrosion:stainless steel lining with PP,temp.:≤80℃ |
||||||||||
D |
Anti-corrosion:stainless steel lining with PTFE,temp.:≤150℃ |
||||||||||
E |
Normal:with safety check valve,with sewage valve,temp.:-50~350℃ |
||||||||||
|
I |
Carbon steel |
Materials |
||||||||
II |
SS304,316,316L |
||||||||||
|
— |
06 |
Flange nominal pressure 0.6MPa |
Working Pressure |
|||||||
|
10 |
Flange nominal pressure 1.0MPa |
|||||||||
16 |
Flange nominal pressure 1.6MPa |
||||||||||
25 |
Flange nominal pressure 2.5MPa |
||||||||||
40 |
Flange nominal pressure 4.0MPa |
||||||||||
63 |
Flange nominal pressure 6.3MPa |
||||||||||
|
— |
20 |
Flange diameter DN20 |
Connection Size |
|||||||
|
25 |
Flange diameter DN25 |
|||||||||
40 |
Flange diameter DN40 |
||||||||||
|
FF |
Flat surface |
Flange Seals |
||||||||
M |
Raised surface |
||||||||||
|
□ |
Measuring range,unit:mm |
Measuring Range |
||||||||
|
J1 |
Steam heating jacket |
Trace heating optional |
||||||||
J2 |
Circulating water heating jacket |
||||||||||
|
|
||||||||||
UGS- □ □ □ □ □ □ □ □ □ |
|